I have searched all over internet
for a simple procedure to change the IMEI no of my JiayuG3,
It’s a dual core 1Ghz 1GB ram Smartphone
with Gorilla glass and retina display. It have ARM V7 processor and MTK6577
chipset with 2.5GB inbuilt memory …
It has brought from
aliexpress.com. They promised me it’s as
a dual sim phone, but unfortunately when
I inserted two Sims on that mobile it
will detect both Sims but only one sim will work. The second sim will say no
network….. oh really sad.. then I tried
so many methods to change the IMEI but no effect… Finally I noticed a simple
procedure to change the IMEI…Here I am sharing with you..
For changing the IMEI no you need
this following things
33- An
valid IMEI no,
Its really difficult to get for individual, so take copy IMEI no
of your old unused mobile phone, and be sure we will never switch on the phone
ever again. If you switch it on, the
both sim will not register to the network.
Its all done….
1-
Go to Engineer mode in mobile Uncle tool
2-
Select Engineer mode[MTK]
3-
Go to CDS information
4-
Select Radio Information
Here you can see Phone1 and
Phone2, in that select phone2, because most of the Chinese clone phone the 1st
Sim which is a 3G will work perfectly. Only the problem happens when we insert
the second sim. If you check you can see the IMEI of 1st sim will
start with 35xxxxx and the 2nd will start with 88xxxxxxxx. That is
why the second sim is not able to register to the network, because its not in
international formatted IMEI. So usually we need to change the IMEI of phone 2.
5-
Select the phone 2
Here you can see a command line with “AT+”. Now just
add this command to it
AT+EGMR=1,10,”15
digit YOUR NEW IMEI NO”
And press “send at command” button. [ if you want to change
the the phone 1 IMEI AT+EGMR=1,7,”NEW IMEI NO”]
Yes we all done… now you can
restart the phone and check the IMEI by pressing *#06#
If you have any doubt please feel
free to ask…
Share Thanks if I helped you!!